Articles

header 115

Der "Wasserlaser"

YEAR
  • 2024
TEASER

Die Firma Microweld ist Spezialist für den Einsatz verschiedener Lasertechnologien. Laserstrahlung hat jedoch zur Folge, dass die Bauteile örtlich hoch erhitzt werden, was bei empfindlichen Werkstoffen zu nachteiligen Veränderungen der Materialeigenschaften führen kann. Dieses Problem löst seit 2023 ein innovatives Laserschneidsystem.

By Klaus Vollrath

Laserstrahl-Mikrobearbeitung für Medizintechnik und Feinmechanik

YEAR
  • 2024
TEASER

Norbert Giraud, CEO von Microwelt, berichtet über seine Kundenerfahrung nach dem Kauf eines wasserstrahlgeführten Lasersystems von Synova SA. Der Vorteil der MicroJet-Technologie besteht darin, dass die Komponenten nicht mit Spuren von störenden Substanzen kontaminiert sind, was besonders wichtig für medizinische Geräte, einschließlich Implantate, ist.

By Klaus Vollrath

Le Couple Laser Jet d'Eau

YEAR
  • 2023
TEASER

Cela fait 26 ans cette année que Synova S.A. réalise et commercialise des équipements d'usinage de grande précision à commande numérique basés sur la technique du laser à guidage par jet d'eau, appelée Laser MicroJet (LMJ). Plus de 500 machines ont été livrées à ce jour dans le monde entier.

Par Edouard Huguelet

Silver Jubilee for the Laser MicroJet

YEAR
  • 2023
TEASER

Synova’s history begins when Bernold Richerzhagen, after obtaining his master’s degree in mechanical engineering from RWTH University Aachen in 1989, applied for a position in a research project at the EPFL’s Applied Optics Laboratory to develop a laser-based dental tool for the removal of caries.

By Nitin Shankar

High End Products for the Lab Grown Diamond Sector

YEAR
  • 2023
TEASER

In an exclusive interview with Bernold Richerzhagen , Chief Executive Officer at Synova SA, the New Jeweller UAE bureau gets to know the advantages of high end technology that is enabeling the lab grown diamond sector to create quality products. 

A Digital Platform to Automate Diamond Polishing

YEAR
  • 2023
TEASER

New technologies are changing the way diamonds are being cut and polished. A combination of hardware and software now enables seamless manufacturing, reducing “mine to market” timelines across the diamond pipeline.

How Diamonds de Canada Reinvented Diamond Cutting

YEAR
  • 2023
TEASER

Benjamin King of Diamonds de Canada is helping tell the origin story and journey of natural diamonds. When diamonds were discovered nearly 4,000 years ago, humans had yet to come across something they could not cut, bend, or shape to their will.

By Grant Mobley

Thin as Film

YEAR
  • 2022
TEASER

In the world of metals fabricating, proces- sing thin materials can pose a challenge – with heat input being one of the main assailants to material composition and integrity. Medical component manufacturers that produce stainless steel stents know this challenge well. 

By Abbe Miller

Synova célèbre ses 25 ans de développement

YEAR
  • 2022
TEASER

Il y a 25 ans, Bernold Richerzhagen, le fondateur de Synova, a réalisé sa vision de combiner la lumière et l'eau pour développer une méthode hybride d'usinage au laser supérieure aux technologies existantes.

By Nitin Shankar

Synova Celebrates 25 Years of Development

YEAR
  • 2022
TEASER

Twenty-five years ago, Bernold Richerzhagen, Synova’s founder, realized his vision of combining light and water to develop a hybrid method of laser machining superior to existing technologies.
 

By Nitin Shankar

On the Threshold of Radical Change

YEAR
  • 2022
TEASER

On the supply side, 15 countries on the African continent now provide 50% of global diamonds. The five largest African mining countries (Angola, Botswana, Namibia, South Africa and Zimbabwe) recover over 35 million carats of diamonds from their mines. 

Migliorare il taglio laser con un getto d’acqua

YEAR
  • 2022
TEASER

La soluzione Laser MicroJet prevede l'unione di due tecnologie e consente di lavorare un'ampia gamma di materiali e spessori con altissima precisione.

By Marco Basso

Les débuts palpitants du laser guidé par jet d'eau

YEAR
  • 2022
TEASER

Richerzhagen imagina l’utilisation combinée de l’eau et du laser lors du développement d’un outil de dentisterie. Cet outil était basé sur un jet d’eau à basse pression aussi fin qu'un cheveu qui guidait le faisceau laser par réflexion totale, comme dans une fibre optique. 

By Nitin Shankar

Gentle to the material, precise, and fast

YEAR
  • 2022
TEASER

Precision processing of high-tech materials using a water laser.
In the patented LMJ technique, the processing is carried out by a water jet as thin as a hair through which high-energy laser impulses are directed. 

By Klaus Vollrath

Präzisionsbearbeitung von Hightech-Werkstoffen mittels Wasser-Laser

YEAR
  • 2022
TEASER

Wasser plus Laser: Beim patentierten LMJ-Verfahren erfolgt die Bearbeitung durch einen haardünnen Wasserstrahl, in den energie- intensive Laserimpulse geleitet werden. Dabei kühlt das Wasser den Arbeitsbereich und verhindert Materialschäden.

By Klaus Vollrath

Faszinierende Anfänge des Wasserstrahl-Lasers

YEAR
  • 2021
TEASER

Die Fusion von Licht und Wasser führt zu einer Technologie, mit der harte Materialien mit hoher Präzision bearbeitet werden können. Die Idee eines Lasers in einem Niederdruck-Wasserstrahl, der den Strahl durch Totalreflexion leitet, kommt aus der Zahnmedizin.

By Nitin Shankar

Laser MicroJet schneidet kalt hochgenau

YEAR
  • 2021
TEASER

Das von der Synova S.A. in Duillier ent- wickelte Schneidverfahren Laser MicroJet (LMJ ) arbeitet mit einer Kombination von Laser- und Wasserstrahl. Hochenergetische Laserimpulse werden von einem feinen Wasserstrahl geführt und bearbeiten, ohne thermisch zu schädigen.

By Klaus Vollrath

Werkstoffschonend, Präzise und Schnell

YEAR
  • 2022
TEASER

Beim patentierten LMJ-Verfahren erfolgt die Bearbeitung durch einen haardünnen Wasser- strahl, in den Laserimpulse geleitet werden. Das Wasser kühlt den Arbeitsbereich und verhindert Materialschäden. Das Verfahren erobert immer mehr Einsatzbereiche. 

By Klaus Vollrath / msc

DaVinci to Revolutionize Diamond Manufacturing Process

YEAR
  • 2022
TEASER

In an exclusive interview with Mr. Bernold Richerzhagen, President and CEO of, SYNOVA SA, the New Jeweller International Bureau got a chance to learn about the company's technological prowess in the Diamond Industry. Mr. Richerzhagen also opines on the DaVinci. 

 

Diamanten-Schneiden wird revolutionniert

YEAR
  • 2011
TEASER

Im August 2010 lieferte das Unternehmen Synova SA aus Ecublens sein erstes DCS 300 Diamanten-Laser-Schneide-System in die indische Stadt Surat (mittlerweile ist das dritte System nach Indien unterwegs). Das neue Schneidesystem markiert einen Quantensprung. 

By Nitin Shankar

Synova's Winning Partnership with Venus Jewel

YEAR
  • 2012
TEASER

When Synova bagged a confirmed order for its DCS 300 diamond cutting system from Venus Jewel, a leading diamond manufacturer, it marked a new phase in the partnership between two companies seeking continual improvement in diamond cutting technologies. 

By Nitin Shankar

Synova et la connexion diamant

YEAR
  • 2012
TEASER

Quand le Dr. Bernold Richerzhagen, diplômé de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), a développé ce système Laser MicroJet® breveté, il ne s’imaginait pas que son invention pourrait changer le processus de découpe des diamants.

By Nitin Shankar

Synova Cutting of Solar Cells

YEAR
  • 2012
TEASER

European manufacturers have to search for business opportunities rather in the area of premium technology than in high-volume business. These include new cell concepts, material improvements or new processing methods. 

By Jörn Iken

Le Laser-Microjet® dans l'industrie horlogère

YEAR
  • 2012
TEASER

La technologie Synova LMJ pour l’usinage des composants est parfaitement adaptée aux besoins de l’industrie horlogère d’aujourd’hui, ce secteur étant en train d’augmenter sa capacité de production afin de satisfaire la demande mondiale en montres de luxe haut de gamme.

By Nitin Shankar

LMJ: Reliable Micro Manufacturing of Diamonds and Watch Parts

YEAR
  • 2013
TEASER

The LMJ has found a broad range of applications in the precision micro machining field. It is used today in a wide range of industrial fields, such as semiconductor, solar, electronics, medical, tooling, high-brightness LED, watch and automotive industries.

By Nitin Shankar

Schneiden mit dem Laser MicroJet

YEAR
  • 2013
TEASER

Das LMJ-Schneiden wird bereits in vielen industriellen Anwendungen zum Schneiden von Diamant, Halbleiter und Metallen eingesetzt. Vorteile des LMJs sind hohe Kantenqualität, keine Wärmeeinflusszone, große Abtragraten und große Aspektverhältnisse der Schnittfugen.

By Annika Richman

The Perfect Shape of Diamond Tools

YEAR
  • 2014
TEASER

Sample material: 1. PCD 2. CVD 3. SCD (MONO type). 

The pictures show the very high quality of the cut on each type of material. 

 

By Dr. Peter Heath

Werkzeugbearbeitung mit wasserstrahlgeführtem Laser

YEAR
  • 2014
TEASER

Beim LMJ-Verfahren des Unternehmens Synova wird der Laserstrahl gebündelt und in einen haardünnen Wasserstrahl mit geringem Druck geführt, um präzise Verarbeitungsschritte wie Schneiden, Kantenschleifen, Bohren oder Ritzen auszuführen. 

By Nitin Shankar

Water jet guided laser tool machining

YEAR
  • 2014
TEASER

When it comes to machining cutting tool inserts made of materials like PCD, CVD, MCD and natural diamond, the hybrid Laser Microjet method delivers performance and quality that can more than compete with conventional techniques like spark erosion or laser machining.

By Nitin Shankar

Nouveau laser dual couplé au jet d'eau

YEAR
  • 2018
TEASER

L’industrie horlogère apprécie grandement la technologie Laser MicroJet® (LMJ) pour la fabrication de pièces du prototypage à la série. La technologie du LMJ se définit par l’utilisation d’un faisceau laser vert couplé à un jet d’eau sous basse pression.

By Jean-René Gonthier

Hochpräzisions-Laserbearbeitung - So funktioniert der Wasser-Laser

YEAR
  • 2020
TEASER

So funktioniert der Wasser-Laser. Hoch- präzisions-Bearbeitung mit dem „kalten“ Wasser-Laser. Das von einem Schweizer Unternehmen entwickelte und patentierte LMJ-Verfahren beruht -bildlich gesprochen- auf der Kombination von Feuer und Wasser.

By Klaus Vollrath 

The First Coupling of a Laser Beam to a Water Jet

YEAR
  • 2021
TEASER

How a miniature dental hand tool started a revolution in cool laser machining. Starting with a dental tool developed in a Swiss laboratory in 1993, this invention has fostered high-precision laser machining in the aviation, diamond and semiconductor industries amongst others.

By Nitin Shankar

Ces stagiaires valent de l'or, les entreprises l'ont bien compris

YEAR
  • 2014
TEASER

Chaque année, quelque 900 étudiants de l’EPFL passent quelques semaines – voir quelques mois – en entreprise pour un stage obligatoire, dont la validation est nécessaire pour obtenir leur diplôme. Une collaboration gagnante autant pour le stagiaire que l’employeur.

By Julien Robyr

Cool Laser for Cutting Diamonds

YEAR
  • 2015
TEASER

Laser MicroJet combines the advantage of both laser cutting and water cooling in one operation. Raw diamonds can contain inclusions in the form of non-diamond hybrid materials or air bubbles, making them susceptible to damage from intense heat during laser cutting. 

By Nitin Shankar

Allzweck-Laser für Uhrenteile

YEAR
  • 2015
TEASER

Wegen ihrer besonderen Fähigkeiten bei der Bearbeitung von Mikrokomponenten finden die Synova LCS (Laser Cutting System) Laserschneidmaschinen-Familie Einsatz bei schweizerischen Uhrenherstellern wie Cartier, Hublot und Vacheron-Constantin.

By Nitin Shankar

Kalte Laser zum Schneiden von CVD-Diamanten

YEAR
  • 2015
TEASER

Die LCS Familie von Laser-Schneidmaschinen, die mit dem LMJ ausgestattet sind, kombinieren den Vorteil des Wasser- und Laserschneidens in einem Vorgang. Diese Lasermaschinen sind in der Lage, sehr harte synthetische Diamanten in Scheiben zu schneiden. 

By Nitin Shankar

Laboratory Grown Diamonds for Industrial Application

YEAR
  • 2015
TEASER

The Synova LCS (Laser Cutting System) family of machines equipped with the patented Laser MicroJet combines the advantage of both water and laser cutting in one operation. This laser can slice hard synthetic diamonds for use as cutting tools with smooth edged surfaces.

By Nitin Shankar 

Wet Laser Machining for Industrial Diamond Tools

YEAR
  • 2015
TEASER

Over 30 wet lasers are now running for "sawing" gem diamond in India, Belgium, Thailand, Russia and South Africa. There are many application areas for the wet laser from drilling holes in ceramic coated, superalloy turbine blades to cutting gears for luxury watches. 

By Dr. Peter J. Heath, Mr. Sébastien Kurzen

CVD-Diamanten für Werkzeugeinsätze

YEAR
  • 2016
TEASER

Die Synova LCS Familie, die mit dem patentierten Laser Microjet ausgestattet sind, kombinieren den Vorteil von Wasser- und Laserschneiden in einem neuen Prozess. Diese Lasermaschinen können synthetische Diamanten in Scheiben schneiden. 

 

HybridCell for Turbine Blade Hole Drilling

YEAR
  • 2016
TEASER

EDM and laser are the two proven technologies for drilling precision holes. Makino and Synova have developed a hybrid cell, combining both technologies to offer the ideal solution for drilling tapered or funnelled holes in turbine engine components.

By Nitin Shankar

Cutting Diamond Tools by Laser MicroJet

YEAR
  • 2017
TEASER

LMJ Process: In the Laser MicroJet system, a laser beam, passing through a pressurized water chamber, is focused into a nozzle. The low-pressure water jet emitted from the nozzle guides the laser beam by means of total internal reflection at the water/air interface.

By Sébastien Kurzen, Nitin Shankar

Plant Tour: GE Aviation, Asheville, NC, US

YEAR
  • 2017
TEASER

An avant-garde approach to unprecedented CMC parts production. GE Aviation (Evendale, OH, US) has spent more than US$1.5 billion to bring to market ceramic matrix composites that can be mass produced. The quantity of CMC raw material GE uses has increased twenty-fold. 

 By Ginger Gardiner

Laser Machining of Diamond Tools

YEAR
  • 2017
TEASER

Artificial diamond cutting tools are replacing tungsten carbide and ceramic composites where high quality surface finishes are required. Only laser technologies are capable of machining such materials, which are (like some ceramics) as hard as natural diamonds. 

By Nitin Shankar

Ciselage fin de composites ou de diamants

YEAR
  • 2017
TEASER

Le secret des machines Synova: la maîtrise du feu et de l'eau pour la découpe de diamands. En effet par la conjonction d'un faisceau laser contenu dans un jet d'eau les diamants peuvent désormais être finement taillés. Mais les horlogers peuvent aussi tirer parti de cette technologie.

By Jean-René Gonthier

Cutting Diamond Tools by Laser MicroJet

YEAR
  • 2018
TEASER

Developments in Wet Laser Machining of Industrial Diamond Tools. Artificial diamond materials replace tungsten carbide and ceramic composites in cutting tools when high surface finish quality is required. Nozzle materials go from lower end PCD to high-end SCD. 

By Sébastien Kurzen, Nitin Shankar

Schneiden von Diamantwerkzeugen mit Laser MicroJet

YEAR
  • 2019
TEASER

Neue Entwicklungen in der wasserstrahl- geführten Laserbearbeitung von industriellen Diamantwerkzeugen. Beim Laser MicroJet System wird ein Laserstrahl nach seinem Durchgang durch eine druckbelastete Wasser- kammer in eine Düse fokussiert. 

By Sébastien Kurzen, Nitin Shankar

Fusing waterjet, laser for efficiency in CFRP/CMC machining

YEAR
  • 2019
TEASER

As carbon fiber-reinforced polymer (CFRP) and ceramic matrix composite (CMC) materials proliferate in aircraft engines, space components and hypersonic applications, machining becomes an issue where precision and efficiency can alter program outcomes.

By Ginger Gardiner

Volume Production of Machining Tools Using LMJ Technology

YEAR
  • 2019
TEASER

Technology Volume production of high precision tools with new 5-axis LCS 305. Synova’s patented LMJ technology delivers better results than conventional dry lasers and has become a benchmark in the processing of diamond materials. 

By Jacques Coderre, Rémi Laure, Amédée Zryd

As fast as laser, as precise as EDM

YEAR
  • 2019
TEASER

LMJ guides a laser beam within a hair-thin water jet enabling a long working length. While it remains a thermal technology, the coupling with the water jet enables better local cooling and cleaning. Synova is the pioneer in exploring and commercialising this cool technology.

By Jun Wang and Gerrit Ter Hoek

Laserstrahl mit Kühleffekt

YEAR
  • 2017
TEASER

Um die Effizienz von Flugzeugturbinen zu verbessern, werden zunehmend leistungs- fähigere Werkstoff-Komposite verwendet. Beim Fertigen der immer ausgefeilteren Kühl- bohrungen zeigt der wasserstrahlgeführte Laser seine Stärken. 

By Nitin Shankar

Laser Gets Wet

YEAR
  • 2016
TEASER

Just add water. According to a report recently published by General Electric, that’s the ticket to making laser machining a viable process for producing the cooling holes that pepper the surfaces of turbine blades for both gas and industrial applications. 

By Matt Danford